Ferrari 268 SP
This 2,458 cc barchetta was fitted with a single overhead camshaft V8 engine fed by four twin-choke Weber carburettors good for around 250 bhp. The tubular space-frame featured all-round independent suspension while the bodywork was very similar to the 246 SP’s. The 268 SP version was also fitted with a V8 engine the displacement of which, with the stroke increased to 71 mm, was upped to 2,650 cc.
- V8ENGINE
- 2644.96 ccTOTAL DISPLACEMENT
- 195 kWMAXIMUM POWER @ 7000 rpm
- 330.62 ccUnitary displacement
Engine
- Typerear, longitudinal 90° V8
- Bore/stroke77 x 71mm
- Unitary displacement330.62cc
- Total displacement2644.96cc
- Compression ratio9.8 : 1
- Maximum power195 kW (265 hp) at 7000 rpm
- Power per litre100hp/l
- Maximum torque-
- Valve actuationsingle overhead camshaft per bank, two valves per cylinder
- Fuel feedfour Weber 40 IF2C carburettors
- Ignitionsingle spark plug per cylinder, single coil
- Lubricationdry sump
- Clutchmulti-plate
Chassis
- Frametubular steel
- Front suspensionindependent, unequal-length wishbones, coil springs, telescopic shock absorbers, anti-roll bar
- Rear suspensionindependent, unequal-length wishbones, coil springs, telescopic shock absorbers
- Brakesdiscs
- Transmission5-speed + reverse
- Steeringrack-and-pinion
- Fuel tankcapacity 130litres
- Front tyres5.50 x 15
- Rear tyres7.00 x 15
Bodywork
- Typetwo-seater spider
- Length4060mm
- Width1480mm
- Height970mm
- Wheelbase2320mm
- Front track1200mm
- Rear track1200mm
- Weight660kg (dry)
Performance
- Top speed-
- Acceleration 0-100 km/h-
- 0-400 m-
- 0-1000 m-