3.2 Mondial (1985)
The Mondial 3.2 model succeeded the Mondial Quattrovalvole, and was available in both coupe and cabriolet form, being announced concurrently with the 328 series of 2 seat models at the 1985 Frankfurt Salon. The 3.2 in the model title referred purely to the cubic capacity of the engine in litres. This model saw the first change in the body styling, with revised front and rear ends incorporating smooth body colour bumper assemblies, and a radiator grille with front light and radiator grille assemblies that mirrored those of the 328 cousin. These revisions had the effect of producing a more instantly recognisable homogeneous range of eight cylinder models in the Ferrari catalogue. The body shape remained otherwise unaltered from its predecessor, although once again the interior detailing was revamped, the most noticeable being angled top corners to the instrument nacelle. A leather dashboard and/or headlining was available as an option. The five spoke road wheel pattern changed from a flat spoke design to a convex spoke layout to accommodate negative offset suspension geometry for the optional ABS braking system, which would eventually become standard equipment. This resulted in an increase of 25mm and 50mm respectively, in the front and rear track.
The main European market Mondial 3.2 coupé models had a tubular chassis with factory type reference F 108 CL 100, which featured a bolted rear sub-frame section, so that the complete engine, transmission and rear suspension assembly could be removed as a single unit, for ease of maintenance.
The V8 engine of the Mondial 3.2 was basically the same design as that used in the Mondial Quattrovalvole model, but fitted with Bosch K Jetronic fuel injection and Marelli MED 806A Microplex electronic ignition to produce a claimed 270bhp at 7000rpm for main European market models, and 260bhp for US market models. It was of a 90 degree configuration, with belt driven twin overhead camshafts per bank, having a total capacity of 3185cc, with a bore and stroke of 83mm x 73mm, bearing factory type reference F 105 C 000 for European market cars. The engine was transversely mounted in unit with the all synchromesh five speed transmission assembly, which was below, and to the rear of the engine's wet sump.
As with the concurrent 2 seater models right and left hand drive was available, together with various world market specification models. From chassis number 75000, odd and even numbers were used for the road production cars, and Mondial 3.2 model production spanned this figure thus they have odd numbers up to this figure, and odd and even above it. The model was produced in a total of 987 units from 1985 to 1989, in the chassis number range 58277 to 79671.