Wheel rims kit
Forged 20" wheel rims kit
The reduction of rotating masses is a key step towards achieving top performance. To achieve this result, a dedicated wheel has been developed exclusively for the Ferrari aftermarket with the aim of maximising the sports feel of the Ferrari California.
The new range of wheels for the California was developed, drawing inspiration from the design that resulted in the success of the optional HGTE package on the 599.
The new 20” wheels combine the technology of a one-piece forged unit with the 5-spoke design of the HGTE package, although further developing as yet unexpressed potential in terms of the three-dimensional geometry of the wheel centre and tapering of the spokes towards the rim. As in the case of the HGTE wheel, also these hubs are not compatible with run-flat tyres.
On the road this solution translates into a wheel that offers high rigidity in relation to transverse stress, with reduced inertia. These conditions improve the overall dynamic response of the wheel, allowing faster entry into bends and faster direction changes.
The spirit of extreme weight reduction that lies behind the new wheel is also reflected in the choice of wheel studs: these are the new titanium studs, which, when used in combination with this wheel, produce total weight saving of 11.3 kg on the car compared with the standard configuration with the optional 20” wheel.
The wheel is available with two alternative surface finishes, a monochrome dark matte grey, and a second finish with the same basic colour but with diamond-textured relief surfaces; the package is available in two kits, including both the wheels and the studs.
Diamond-finish 20” wheel rims kit
A set of four 5-spoke 20’’ front and rear wheels in light alloy with double branches. This special design is a style feature recalling GT championship wheels. The diamond finish gives the wheel a special sheen, showing off its shapes and lines.
These sports wheels should be fitted with 245/35 ZR20” tyres for the front axle and 285/35 ZR20” on the rear.
The larger diameter and smaller side-wall really enhance the sports concept of the vehicle.
Forged diamond wheel rims kit
A set of 4 forged diamond finish 19’’ star wheels. The diamond finish gives the wheel a special sheen, showing off its shapes and lines.
The use of forged wheels allows an 11kg weight reduction overstandard wheels: non-suspended mass reduction guarantees a more direct feeling of connectedness with the vehicle, allowing customers with a more dynamic and demanding driving style to fully savour the sports spirit of the California.
Standard diamond wheel rims kit
A set of four standard 19’’ wheels in diamond-finish light alloy with a traditional 5-spoke Ferrari design. The diamond finish gives the wheel a special sheen, showing off its shapes and lines.
Standard 19’’ diamond finish wheels should be fitted with 245/40 ZR19” tyres for the front axle and 285/40 ZR19” tyres for the rear.